ac71b8a1-7d4d-4177-9e86-ffcfad7aa90aConnector RCA/Cinch plug (4.1g) (gold-plated)technology mix; unit of reference flow in dataset is 1 pieceproduction mix, at producerplug (4.1g) (gold-plated)connector, plug, socket, receptacle, jack, male, femaleSystemsElectrics and electronicsThe data set covers all relevant process steps / technologies over the supply chain of the represented cradle to gate inventory with a good overall data quality. The inventory is mainly based on industry data and is completed, where necessary, by secondary data. This data set is based on primary data from internationally adopted production processes, connected with regional precursor chains.0The data set represents the globally estimated situation, focusing on the main technologies, and considering CN as manufacturing site.Foreground system: The dataset represents the production of different connectors, male and female.
In general, a connector is made up of conductive pins surrounded by a protective housing. Each pin has a contact/mating surface at one end, i.e. a surface capable of forming a good electrical connection when one side of the connector is pressed into the other. At the other end, there is typically a solderable surface for bonding the connector to a wire or a printed wiring board. The pins are mounted in an enclosure, typically of plastic or metal, may be surrounded by a shield to prevent electromagnetic / radio frequency interference (EMI/RFI) and may have one or more screws/nuts/washers to help keep the connector ends together once joined.
The piece of wire inside the connector from the end of the pins to the end of the bend protection is excluded from the assessment.
The plating process has been omitted as no data were available and the environmental relevance of this process is likely to be very small relative to extraction and refinement of the raw materials themselves (which are included).
The system boundaries comprise the cradle-to-gate life cycle of connectors. The dataset covers environmentally relevant process steps from raw material acquisition through to manufacturing of the finished connector. Transport of raw materials to the connector manufacturer is included, but transport of the finished connector to intermediate parties (i.e. wholesalers or retailers), product manufacturers and customers is excluded. Packaging of the connector and the connector’s end-of-life are also excluded. Foreground data were based on a combination of specification sheets, material declarations and physical disassembly and analysis (visual identification and weighting) of parts and materials of one connector.
Background system: Production is assumed to occur in Asia. Background data on materials, components and processes were taken from current GaBi databases.
Electricity: Electricity is modelled according to the individual country-specific situations. The country-specific modelling is achieved on multiple levels. Firstly, individual energy carrier specific power plants and plants for renewable energy sources are modelled according to the current national electricity grid mix. Modelling the electricity consumption mix includes transmission / distribution losses and the use by energy producers (own consumption of power plants and "other" own consumption e.g. due to pumped storage hydro power etc.), as well as imported electricity. Secondly, the national emission and efficiency standards of the power plants are modelled as well as the share of electricity plants and combined heat and power plants (CHP). Thirdly, the country-specific energy carrier supply (share of imports and / or domestic supply) including the country-specific energy carrier properties (e.g. element and energy content) are accounted for. Fourthly, the exploration, mining/production, processing and transport processes of the energy carrier supply chains are modelled according to the specific situation of each electricity producing country. The different production and processing techniques (emissions and efficiencies) in the different energy producing countries are considered, e.g. different crude oil production technologies or different flaring rates at the oil platforms.
Thermal energy, process steam: The thermal energy and process steam supply is modelled according to the individual country-specific situation with regard to emission standards and considered energy carriers. The thermal energy and process steam are produced at heat plants. Efficiencies for thermal energy production are by definition 100% in relation to the corresponding energy carrier input. For process steam the efficiency ranges from 85%, 90% to 95%. The energy carriers used for the generation of thermal energy and process steam are modelled according to the specific import situation (see electricity above).
Transports: All relevant and known transport processes are included. Ocean-going and inland ship transport as well as rail, truck and pipeline transport of bulk commodities are considered.
Energy carriers: The energy carriers are modelled according to the specific supply situation (see electricity above).
Refinery products: Diesel fuel, gasoline, technical gases, fuel oils, lubricants and residues such as bitumen are modelled with a parameterised country-specific refinery model. The refinery model represents the current national standard in refining techniques (e.g. emission level, internal energy consumption, etc.) as well as the individual country-specific product output spectrum, which can be quite different from country to country. The supply of crude oil is modelled, again, according to the country-specific situation with the respective properties of the resources.Polybutylene Terephthalate Granulate (PBT) MixGlass fibresBrass (CuZn30)Nickel mixGold (primary)The connectors are mounted on a wire or a printed wiring board and provide devices or IT components with power and data. Connectors are used in many types of electrical products.
In the table below, connectors are listed with the main parameters: the name of the connector, the weight in g, the number of pins, the pin plating material and plastic type. The names of plastics have been abbreviated, for example, PA 6.6 GF 30 % means Polyamide 6.6 reinforced with 30 % glass fibre.electronics_connectors_table cinch.jpgAll datasets were produced from a parametric cradle-to-gate life cycle assessment model for electrical connectors. It is sufficiently general that it can be used to model both male (plug) and female (receptacle/socket) connectors of all common types, e.g. audio/video, circular, terminal, board-to-board and wire-to-board.
In general, a connector is made up of conductive pins surrounded by a protective housing. Each pin has a contact/mating surface at one end, i.e. a surface capable of forming a good electrical connection when one side of the connector is pressed into the other. At the other end there is typically a solderable surface for bonding the connector to a wire or a printed wiring board. The pins are mounted in an enclosure, typically of plastic or metal, may be surrounded by a shield to prevent electromagnetic / radio frequency interference (EMI/RFI) and may have one or more screws/nuts/washers to help keep the connector ends together once joined.LCI resultAttributionalNoneAllocation - market valueAllocation - net calorific valueAllocation - exergetic contentAllocation - massForeground system: For the foreground system, no allocation was applied.
Background system: For the combined heat and power production, allocation by exergetic content is applied. For the electricity generation and by-products, e.g. gypsum, allocation by market value is applied due to no common physical properties. Within the refinery allocation by net calorific value and mass is used. For the combined crude oil, natural gas and natural gas liquids production allocation by net calorific value is applied.
For details please see the document "GaBi Databases Modelling Principles"Direct land use change: GHG emissions from direct LUC allocated to good/service for 20 years after the LUC occurs.
Carbon storage and delayed emissions: credits associated with temporary (carbon) storage or delayed emissions are not considered in the calculation of the Global Warming Potential impacts for the default impact categories.
Emissions off-setting: not included
Fossil and biogenic carbon emissions and removals: removals and emissions are modelled as follows: All GHG emissions from fossil fuels (including peat and limestone) are modelled consistently with the ILCD list of elementary flows. In the case that the emissions refer to the molecules CO2 and CH4, they are modelled as ‘carbon dioxide (fossil)’ and ‘methane (fossil)’. Biogenic uptake and emissions are modelled separately. For land use change, all carbon emissions and uptakes are inventoried separately for each of the elementary flows. Soil carbon accumulation (uptake) via improved agricultural management is excluded from the model.NoneGaBi Modelling PrinciplesGaBi Water Modelling PrinciplesGaBi Agriculture Model DocumentationGaBi Land Use Change Model DocumentationGaBi Energy Modelling PrinciplesGaBi Refinery Modelling PrinciplesCut-off rules for each unit process: Coverage of at least 95% of mass and energy of the input and output flows, and 98% of their environmental relevance (according to expert judgment).NoneLCI modelling is fully consistent.NoneFor details please see the document "GaBi Databases Modelling Principles"None95.0NoneThe data set covers cradle-to-gate system of connectors production. The data set can be used for all LCA/CF studies where a connector is needed. Combination with individual unit processes using this commodity enables the generation of user-specific (product) LCAs.All relevant flows quantifiedCML2001 - Apr. 2015, Photochem. Ozone Creation Potential (POCP)CML2001 - Apr. 2015, Eutrophication Potential (EP)CML2001 - Apr. 2015, Freshwater Aquatic Ecotoxicity Pot. (FAETP inf.)CML2001 - Apr. 2015, Acidification Potential (AP)CML2001 - Apr. 2015, Marine Aquatic Ecotoxicity Pot. (MAETP inf.)CML2001 - Apr. 2015, Ozone Layer Depletion Potential (ODP, steady state)CML2001 - Apr. 2015, Terrestric Ecotoxicity Potential (TETP inf.)CML2001 - Apr. 2015, Human Toxicity Potential (HTP inf.)CML2001 - Apr. 2015, Global Warming Potential (GWP 100 years)CML2001 - Apr. 2015, Global Warming Potential (GWP 100 years), excl biogenic carbonCML2001 - Apr. 2015, Abiotic Depletion (ADP elements)CML2001 - Apr. 2015, Abiotic Depletion (ADP fossil)CML2001 - Apr. 2015, Global Warming Potential (GWP 100), Land Use Change only, no norm/weightCML2001 - Apr. 2015, Global Warming Potential (GWP 100), excl bio. C, incl LUC, no norm/weightCML2001 - Apr. 2015, Global Warming Potential (GWP 100), incl bio. C, incl LUC, no norm/weightAnthropogenic Abiotic Depletion Potential (AADP), TU BerlinResource depletion water, midpoint (v1.06)Resource depletion, mineral, fossils and renewables, midpoint (v1.06)Climate change midpoint, incl biogenic carbon (v1.06)Particulate matter/Respiratory inorganics midpoint (v1.06)Acidification midpoint (v1.06)Eutrophication terrestrial midpoint (v1.06)Climate change midpoint, excl biogenic carbon (v1.06)Eutrophication freshwater midpoint (v1.06)Ionizing radiation midpoint, human health (v1.06)Eutrophication marine midpoint (v1.06)Ozone depletion midpoint (v1.06)Photochemical ozone formation midpoint, human health (v1.06)Ecotoxicity freshwater midpoint (v1.06)Human toxicity midpoint, cancer effects (v1.06)Human toxicity midpoint, non-cancer effects (v1.06)IPCC AR5 GWP20, incl cc fb, incl biogenic carbonIPCC AR5 GWP100, incl cc fb, incl biogenic carbonIPCC AR5 GTP50, incl cc fb, incl biogenic carbonIPCC AR5 GTP20, incl cc fb, incl biogenic carbonIPCC AR5 GTP100, incl cc fb, incl biogenic carbonIPCC AR5 GTP100, incl cc fb, incl biogenic carbon, incl Land Use Change, no norm/weightIPCC AR5 GTP20, incl cc fb, incl biogenic carbon, incl Land Use Change, no norm/weightIPCC AR5 GTP50, incl cc fb, incl biogenic carbon, incl Land Use Change, no norm/weightIPCC AR5 GWP100, incl cc fb, incl biogenic carbon, incl Land Use Change, no norm/weightIPCC AR5 GWP20, incl cc fb, incl biogenic carbon, incl Land Use Change, no norm/weightIPCC AR5 GTP20, incl cc fb, incl biogenic carbon, Land Use Change only, no norm/weightIPCC AR5 GWP20, incl cc fb, incl biogenic carbon, Land Use Change only, no norm/weightIPCC AR5 GWP100, incl cc fb, incl biogenic carbon, Land Use Change only, no norm/weightIPCC AR5 GTP50, incl cc fb, incl biogenic carbon, Land Use Change only, no norm/weightIPCC AR5 GTP100, incl cc fb, incl biogenic carbon, Land Use Change only, no norm/weightIPCC AR5 GWP20, incl cc fb, excl biogenic carbonIPCC AR5 GWP100, incl cc fb, excl biogenic carbonIPCC AR5 GTP50, incl cc fb, excl biogenic carbonIPCC AR5 GTP20, incl cc fb, excl biogenic carbonIPCC AR5 GTP100, incl cc fb, excl biogenic carbonIPCC AR5 GWP100, incl cc fb, excl biogenic carbon, incl Land Use Change, no norm/weightIPCC AR5 GWP20, incl cc fb, excl biogenic carbon, incl Land Use Change, no norm/weightIPCC AR5 GTP100, incl cc fb, excl biogenic carbon, incl Land Use Change, no norm/weightIPCC AR5 GTP20, incl cc fb, excl biogenic carbon, incl Land Use Change, no norm/weightIPCC AR5 GTP50, incl cc fb, excl biogenic carbon, incl Land Use Change, no norm/weightIPCC AR5 GWP20, incl cc fb, excl biogenic carbon, Land Use Change only, no norm/weightIPCC AR5 GWP100, incl cc fb, excl biogenic carbon, Land Use Change only, no norm/weightIPCC AR5 GTP50, incl cc fb, excl biogenic carbon, Land Use Change only, no norm/weightIPCC AR5 GTP20, incl cc fb, excl biogenic carbon, Land Use Change only, no norm/weightIPCC AR5 GTP100, incl cc fb, excl biogenic carbon, Land Use Change only, no norm/weightPrimary energy from non renewable resources (gross cal. value)Primary energy from non renewable resources (net cal. value)Primary energy from renewable resources (gross cal. value)Primary energy from renewable resources (net cal. value)Primary energy demand from ren. and non ren. resources (net cal. value)Primary energy demand from ren. and non ren. resources (gross cal. value)ReCiPe 1.08 Endpoint (H) - Agricultural land occupationReCiPe 1.08 Endpoint (H) - Climate change Ecosystems, default, excl biogenic carbonReCiPe 1.08 Endpoint (H) - Climate change Human Health, default, excl biogenic carbonReCiPe 1.08 Endpoint (H) - Fossil depletionReCiPe 1.08 Endpoint (H) - Freshwater ecotoxicityReCiPe 1.08 Endpoint (H) - Freshwater eutrophicationReCiPe 1.08 Endpoint (H) - Human toxicityReCiPe 1.08 Endpoint (H) - Ionising radiationReCiPe 1.08 Endpoint (H) - Marine ecotoxicityReCiPe 1.08 Endpoint (H) - Metal depletionReCiPe 1.08 Endpoint (H) - Ozone depletionReCiPe 1.08 Endpoint (H) - Particulate matter formationReCiPe 1.08 Endpoint (H) - Photochemical oxidant formationReCiPe 1.08 Endpoint (H) - Terrestrial acidificationReCiPe 1.08 Endpoint (H) - Terrestrial ecotoxicityReCiPe 1.08 Endpoint (H) - Urban land occupationReCiPe 1.08 Midpoint (H) - Agricultural land occupationReCiPe 1.08 Midpoint (H) - Climate change, default, excl biogenic carbonReCiPe 1.08 Midpoint (H) - Fossil depletionReCiPe 1.08 Midpoint (H) - Freshwater ecotoxicityReCiPe 1.08 Midpoint (H) - Freshwater eutrophicationReCiPe 1.08 Midpoint (H) - Human toxicityReCiPe 1.08 Midpoint (H) - Ionising radiationReCiPe 1.08 Midpoint (H) - Marine ecotoxicityReCiPe 1.08 Midpoint (H) - Marine eutrophicationReCiPe 1.08 Midpoint (H) - Metal depletionReCiPe 1.08 Midpoint (H) - Natural land transformationReCiPe 1.08 Midpoint (H) - Particulate matter formationReCiPe 1.08 Midpoint (H) - Photochemical oxidant formationReCiPe 1.08 Midpoint (H) - Terrestrial acidificationReCiPe 1.08 Midpoint (H) - Terrestrial ecotoxicityReCiPe 1.08 Midpoint (H) - Urban land occupationReCiPe 1.08 Midpoint (H) - Water depletionReCiPe 1.08 Midpoint (H) - Ozone depletionReCiPe 1.08 Endpoint (H) - Natural land transformationReCiPe 1.08 Midpoint (H) - Climate change, incl biogenic carbonReCiPe 1.08 Endpoint (H) - Climate change Ecosystems, incl biogenic carbonReCiPe 1.08 Endpoint (H) - Climate change Human Health, incl biogenic carbonReCiPe 1.08 Endpoint (H) - Climate change Ecosystems, incl biog. C, incl LUC, no norm/weightReCiPe 1.08 Endpoint (H) - Climate change Human Health, incl biog. C, incl LUC, no norm/weightReCiPe 1.08 Midpoint (H) - Climate change, incl biog. C, incl LUC, no norm/weightReCiPe 1.08 Endpoint (H) - Climate change Ecosystems, excl biog. C, incl LUC, no norm/weightReCiPe 1.08 Endpoint (H) - Climate change Human Health, excl biog. C, incl LUC, no norm/weightReCiPe 1.08 Midpoint (H) - Climate change, excl biog. C, incl LUC, no norm/weightReCiPe 1.08 Midpoint (H) - Climate change, LUC only, no norm/weightReCiPe 1.08 Endpoint (H) - Climate change Ecosystems, LUC only, no norm/weightReCiPe 1.08 Endpoint (H) - Climate change Human Health, LUC only, no norm/weightReCiPe 1.08 Midpoint (E) - Climate change, default, excl biogenic carbonReCiPe 1.08 Endpoint (E) - Climate change Ecosystems, default, excl biogenic carbonReCiPe 1.08 Endpoint (E) - Climate change Human Health, default, excl biogenic carbonReCiPe 1.08 Endpoint (E) - Freshwater eutrophicationReCiPe 1.08 Midpoint (E) - Freshwater eutrophicationReCiPe 1.08 Midpoint (E) - Marine eutrophicationReCiPe 1.08 Endpoint (E) - Ozone depletionReCiPe 1.08 Midpoint (E) - Ozone depletionReCiPe 1.08 Endpoint (E) - Terrestrial acidificationReCiPe 1.08 Midpoint (E) - Terrestrial acidificationReCiPe 1.08 Endpoint (E) - Photochemical oxidant formationReCiPe 1.08 Midpoint (E) - Photochemical oxidant formationReCiPe 1.08 Endpoint (E) - Particulate matter formationReCiPe 1.08 Midpoint (E) - Particulate matter formationReCiPe 1.08 Endpoint (E) - Ionising radiationReCiPe 1.08 Midpoint (E) - Ionising radiationReCiPe 1.08 Endpoint (E) - Agricultural land occupationReCiPe 1.08 Endpoint (E) - Urban land occupationReCiPe 1.08 Midpoint (E) - Agricultural land occupationReCiPe 1.08 Midpoint (E) - Urban land occupationReCiPe 1.08 Endpoint (E) - Natural land transformationReCiPe 1.08 Midpoint (E) - Natural land transformationReCiPe 1.08 Midpoint (E) - Fossil depletionReCiPe 1.08 Endpoint (E) - Fossil depletionReCiPe 1.08 Endpoint (E) - Metal depletionReCiPe 1.08 Midpoint (E) - Metal depletionReCiPe 1.08 Midpoint (E) - Water depletionReCiPe 1.08 Midpoint (E) - Terrestrial ecotoxicityReCiPe 1.08 Midpoint (E) - Marine ecotoxicityReCiPe 1.08 Midpoint (E) - Human toxicityReCiPe 1.08 Midpoint (E) - Freshwater ecotoxicityReCiPe 1.08 Endpoint (E) - Terrestrial ecotoxicityReCiPe 1.08 Endpoint (E) - Marine ecotoxicityReCiPe 1.08 Endpoint (E) - Human toxicityReCiPe 1.08 Endpoint (E) - Freshwater ecotoxicityReCiPe 1.08 Endpoint (E) - Climate change Ecosystems, incl biogenic carbonReCiPe 1.08 Endpoint (E) - Climate change Human Health, incl biogenic carbonReCiPe 1.08 Midpoint (E) - Climate change, incl biogenic carbonReCiPe 1.08 Endpoint (E) - Climate change Ecosystems, incl biog. C, incl LUC, no norm/weightReCiPe 1.08 Endpoint (E) - Climate change Human Health, incl biog. C, incl LUC, no norm/weightReCiPe 1.08 Midpoint (E) - Climate change, incl biog. C, incl LUC, no norm/weightReCiPe 1.08 Midpoint (E) - Climate change, excl biog. C, incl LUC, no norm/weightReCiPe 1.08 Endpoint (E) - Climate change Ecosystems, excl biog. C, incl LUC, no norm/weightReCiPe 1.08 Endpoint (E) - Climate change Human Health, excl biog. C, incl LUC, no norm/weightReCiPe 1.08 Endpoint (E) - Climate change Ecosystems, LUC only, no norm/weightReCiPe 1.08 Endpoint (E) - Climate change Human Health, LUC only, no norm/weightReCiPe 1.08 Midpoint (E) - Climate change, LUC only, no norm/weightReCiPe 1.08 Endpoint (I) - Natural land transformationReCiPe 1.08 Midpoint (I) - Ozone depletionReCiPe 1.08 Midpoint (I) - Climate change, default, excl biogenic carbonReCiPe 1.08 Endpoint (I) - Climate change Ecosystems, default, excl biogenic carbonReCiPe 1.08 Endpoint (I) - Climate change Human Health, default, excl biogenic carbonReCiPe 1.08 Endpoint (I) - Freshwater eutrophicationReCiPe 1.08 Midpoint (I) - Freshwater eutrophicationReCiPe 1.08 Midpoint (I) - Marine eutrophicationReCiPe 1.08 Endpoint (I) - Ozone depletionReCiPe 1.08 Endpoint (I) - Terrestrial acidificationReCiPe 1.08 Midpoint (I) - Terrestrial acidificationReCiPe 1.08 Endpoint (I) - Photochemical oxidant formationReCiPe 1.08 Midpoint (I) - Photochemical oxidant formationReCiPe 1.08 Endpoint (I) - Particulate matter formationReCiPe 1.08 Midpoint (I) - Particulate matter formationReCiPe 1.08 Endpoint (I) - Ionising radiationReCiPe 1.08 Midpoint (I) - Ionising radiationReCiPe 1.08 Endpoint (I) - Agricultural land occupationReCiPe 1.08 Endpoint (I) - Urban land occupationReCiPe 1.08 Midpoint (I) - Agricultural land occupationReCiPe 1.08 Midpoint (I) - Urban land occupationReCiPe 1.08 Midpoint (I) - Natural land transformationReCiPe 1.08 Endpoint (I) - Fossil depletionReCiPe 1.08 Midpoint (I) - Fossil depletionReCiPe 1.08 Endpoint (I) - Metal depletionReCiPe 1.08 Midpoint (I) - Metal depletionReCiPe 1.08 Midpoint (I) - Water depletionReCiPe 1.08 Endpoint (I) - Freshwater ecotoxicityReCiPe 1.08 Endpoint (I) - Human toxicityReCiPe 1.08 Endpoint (I) - Marine ecotoxicityReCiPe 1.08 Endpoint (I) - Terrestrial ecotoxicityReCiPe 1.08 Midpoint (I) - Freshwater ecotoxicityReCiPe 1.08 Midpoint (I) - Human toxicityReCiPe 1.08 Midpoint (I) - Marine ecotoxicityReCiPe 1.08 Midpoint (I) - Terrestrial ecotoxicityReCiPe 1.08 Endpoint (I) - Climate change Ecosystems, incl biogenic carbonReCiPe 1.08 Endpoint (I) - Climate change Human Health, incl biogenic carbonReCiPe 1.08 Midpoint (I) - Climate change, incl biogenic carbonReCiPe 1.08 Endpoint (I) - Climate change Ecosystems, incl biog. C, incl LUC, no norm/weightReCiPe 1.08 Endpoint (I) - Climate change Human Health, incl biog. C, incl LUC, no norm/weightReCiPe 1.08 Midpoint (I) - Climate change, incl biog. C, incl LUC, no norm/weightReCiPe 1.08 Endpoint (I) - Climate change Human Health, excl biog. C, incl LUC, no norm/weightReCiPe 1.08 Midpoint (I) - Climate change, excl biog. C, incl LUC, no norm/weightReCiPe 1.08 Endpoint (I) - Climate change Ecosystems, excl biog. C, incl LUC, no norm/weightReCiPe 1.08 Endpoint (I) - Climate change Human Health, LUC only, no norm/weightReCiPe 1.08 Midpoint (I) - Climate change, LUC only, no norm/weightReCiPe 1.08 Endpoint (I) - Climate change Ecosystems, LUC only, no norm/weightTRACI 2.1, Ecotoxicity (recommended)TRACI 2.1, Human toxicity, cancer (recommended)TRACI 2.1, Human toxicity, non-canc. (recommended)TRACI 2.1, Global Warming Air, excl. biogenic carbonTRACI 2.1, Resources, Fossil fuelsTRACI 2.1, Human Health Particulate AirTRACI 2.1, Ozone Depletion AirTRACI 2.1, Smog AirTRACI 2.1, Global Warming Air, incl. biogenic carbonTRACI 2.1, AcidificationTRACI 2.1, EutrophicationTRACI 2.1, Global Warming Air, incl biogenic carbon, incl LUC, no norm/weightTRACI 2.1, Global Warming Air, excl biogenic carbon, incl LUC, no norm/weightTRACI 2.1, Global Warming Air, LUC only, no norm/weightUBP 2013, Global warmingUBP 2013, Pesticides into soilUBP 2013, Radioactive waste to depositUBP 2013, Radioactive substances into airUBP 2013, Water resourcesUBP 2013, Energy resourcesUBP 2013, Water pollutantsUBP 2013, Heavy metals into soilUBP 2013, Mineral resourcesUBP 2013, POP into waterUBP 2013, Radioactive substances into waterUBP 2013, Carcinogenic substances into airUBP 2013, Heavy metals into airUBP 2013, Land useUBP 2013, Heavy metals into waterUBP 2013, Main air pollutantsUBP 2013, Ozone layer depletionUBP 2013, Non radioactive waste to depositUBP 2013, Global warming, incl Land Use ChangeUBP 2013, Global warming, Land Use Change onlyUSEtox, Ecotoxicity (recommended)USEtox, Human toxicity, cancer (recommended)USEtox, Human toxicity, non-canc. (recommended)Total freshwater consumption (including rainwater)Blue water consumptionBlue water useTotal freshwater useThe LCI method applied is in compliance with ISO 14040 and 14044. The documentation includes all relevant information in view of the data quality and scope of the application of the respective LCI result / data set. The dataset represents the state-of-the-art in view of the referenced functional unit.Sphera Solutions GmbHIABP-GaBiFraunhofer IBPOverall quality according to different validation schemes
GaBi = 1,8 interpreted into "good overall quality" in the GaBi quality validation scheme
ILCD = 1,9 interpreted into "basic overall quality" in the ILCD quality validation scheme
PEF = 1,8 interpreted into "very good overall quality" in the PEF quality validation schemeThe dataset and systems, which are provided with our software and databases for public use into a broad user community, are constantly used, compared, benchmarked, screened, reviewed and results published in various external, professional and third party LCA applications in industry, academia and politics. So user feedback via the online GaBi forum or direct via user information is a standard routine in the maintenance and update process and leads to stable quality and constant control and improvement of data, if knowledge or technology improves or industrial process chains develop or change.GaBi user forumGaBi bug forumGaBi user communityThis background LCI data set can be used for any types of LCA studies for products where a connector is used.2022-03-01T00:00:00.000ILCD format 1.1Sphera Solutions GmbH2022-03-01T00:00:00.00000.00.001Data set finalised; entirely publishedGaBi databasesSphera Solutions GmbHtrueOtherGaBi (source code, database including extension modules and single data sets, documentation) remains property of Sphera Solutions GmbH. Sphera Solutions GmbH delivers GaBi licenses comprising data storage medium and manual as ordered by the customer. The license guarantees the right of use for one installation of GaBi. Further installations using the same license are not permitted. Additional licenses are only valid if the licensee holds at least one main license. Licenses are not transferable and must only be used within the licensee's organisation. Data sets may be copied for internal use. The number of copies is restricted to the number of licenses of the software system GaBi the licensee owns. The right of use is exclusively valid for the licensee. All rights reserved.Connector RCA/Cinch plug (4.1g) (gold-plated)Output1.01.00.000Mixed primary / secondaryUnknown derivationvaluable