9c4a0e48-47d9-45b3-b6a2-114ca32c85dfRoofing membrane RESITRIX MB+CL - CCM GmbH - (A1-A3)technology mixproduction mixdensity 3,5kg/m2Roofing and waterproofing membranesSystemsConstructionThis data set contains the results for the modules A1-A3 according to EN 15804. A comparison with other products is only allowed by a similar application in the building. In principle, a comparison or evaluation of EPD data is only possible if all the datasets are created to be compared to EN 15804 and the product-specific features are considered. The following modules are declared for this product in the underlying EPD: A1-A3, C2, C4, D. The following dataset is available for this product in the GaBi database: A1-A30The present LCA refers to the life cycle of roofing and waterproofing membranes RESITRIX ® CL and RESITRIX ® MB manufactured by Carlisle Construction Materials GmbH, based in Hamburg. The EPDM layer is manufactured in Hamburg. The product is coated with polymer-modified bitumen in Waltershausen (Thuringia).Foreground system:
RESITRIX® CL and RESITRIX® MB are hot-air weldable, glass-reinforced roofing and waterproofing membranes based on synthetic EPDM rubber. The underside has a polymer-modified bitumen coating, whereby RESITRIX ® CL contains fine quarz finish and RESITRIX ® MB has a polyethylene separating film. Base materials / Ancillary materials: RESITRIX® CL and RESITRIX® MB comprise a topside based on EPDM and an underside based on a high-quality, polymer-modified bitumen coating. EPDM stands for saturated ethylene-propylene diene rubber. In view of its chemical constitution, this elastomer material is practically ""tailor-made"" for outdoor applications and the complex load factors associated with such applications. Its resistance to UV, ozone, oxidation and heat in terms of chemical and biological factors guarantees material elasticity for decades to come. The topside comprises 25-40% EPDM synthetic rubber, 20-30% filler, 15-20% carbon black, 5-10% mineral oil, 1.5-2.5% cross-linking system and 15-20% processing auxiliaries. The underside comprises 60-75% bitumen, 10-20% filler, 10-20% synthetic rubber (SBS) and 1-5% carbon black. Manufacture: The mixture comprising the individual polymers and respective aggregates is produced in Hamburg in a discontinuous process in an inner mixer automatically receiving the polymers, filler, carbon black, mineral oil, processing auxiliaries and cross-linking via dosing and weighing systems. The ensuing mixture is processed as sheets with a glass fibre backing in a four-roller calender. This is followed by cross-linking (vulcanisation) the elastomer sheeting in automatic vulcanisation machines. This production stage is also performed in Hamburg. Stringent quality controls are followed by coating with polymer-modified bitumen in Waltershausen. The polymer-modified bitumen mass is produced using an intensive mixer with downstream agitators. This fully-automatic process includes another quality check, cutting to length, banding and packaging for transport on pallets. Installation: RESITRIX® MB and RESITRIX® CL are rolled out on the roof surface, secured in place and permanently welded at the seam overlaps using hot air.
No particular measures are required to ensure protection of the fitter's health.The instructions in the installation and planning guideline must be observed. Packaging: The rolls are wound on a cardboard core and secured by a band. 20 rolls are stored on each pallet (= 200 m² / pallet). The pallets are shrink-wrapped for safe transport.
All packaging materials are recyclable. Conditions of use: The chemical constitution of the EPDM rubber lends the roofing membranes a life cycle of several decades. No toxic substances are used for the service life of the declared roofing and waterproofing sheets. During this period of use, there is no change to their composition which is why the sheets retain sufficient elasticity enabling them to withstand the thermal and mechanical loads prevailing on the roof.
Background system:
Electricity: Electricity is modelled according to the individual country-specific situations. The country-specific modelling is achieved on multiple levels. Firstly, individual energy carrier specific power plants and plants for renewable energy sources are modelled according to the current national electricity grid mix. Modelling the electricity consumption mix includes transmission / distribution losses and the own use by energy producers (own consumption of power plants and "other" own consumption e.g. due to pumped storage hydro power etc.), as well as imported electricity. Secondly, the national emission and efficiency standards of the power plants are modelled as well as the share of electricity plants and combined heat and power plants (CHP). Thirdly, the country-specific energy carrier supply (share of imports and / or domestic supply) including the country-specific energy carrier properties (e.g. element and energy content) are accounted for. Fourthly, the exploration, mining/production, processing and transport processes of the energy carrier supply chains are modelled according to the specific situation of each electricity producing country. The different production and processing techniques (emissions and efficiencies) in the different energy producing countries are considered, e.g. different crude oil production technologies or different flaring rates at the oil platforms.
Thermal energy, process steam: The thermal energy and process steam supply is modelled according to the individual country-specific situation with regard to emission standards and considered energy carriers. The thermal energy and process steam are produced at heat plants. Efficiencies for thermal energy production are by definition 100% in relation to the corresponding energy carrier input. For process steam the efficiency ranges from 85%, 90% to 95%. The energy carriers used for the generation of thermal energy and process steam are modelled according to the specific import situation (see electricity above).
Transports: All relevant and known transport processes are included. Ocean-going and inland ship transport as well as rail, truck and pipeline transport of bulk commodities are considered.
Energy carriers: The energy carriers are modelled according to the specific supply situation (see electricity above).
Refinery products: Diesel fuel, gasoline, technical gases, fuel oils, lubricants and residues such as bitumen are modelled with a parameterised country-specific refinery model. The refinery model represents the current national standard in refining techniques (e.g. emission level, internal energy consumption, etc.) as well as the individual country-specific product output spectrum, which can be quite different from country to country. The supply of crude oil is modelled, again, according to the country-specific situation with the respective properties of the resources.RESITRIX® CL is suitable for all types of installation (except loose installation for green roofs). This roofing membrane can be applied using PU adhesive. It can also be glued directly to expanded polystyrene (EPS).
RESITRIX® MB can be installed: loose laid with mechanical fixings and loose laid with ballast (except for green roofs).LCI resultAttributionalNoneAllocation - market valueAllocation - net calorific valueAllocation - exergetic contentAllocation - massForeground system:
As only the semi-finished product is manufactured in Hamburg and it is the same for all variants, no allocations were necessary here. Energy consumption in the Waltershausen plant was distributed across the variants on the basis of the areas produced (m²). Recipe data was used for the raw material volumes.
In the case of thermal utilisation in a waste incineration plant, credits for electricity and thermal energy in Module D (from C4 in the case of thermal utilisation of roofing membranes as well as from A3 in the case of packaging and production waste) were considered in an input-specific manner taking account of the respective elementary composition and calorific value. The credited processes relate to Germany on account of the production facilities located there.
Background system: For the combined heat and power production, allocation by exergetic content is applied. For the electricity generation and by-products, e.g. gypsum, allocation by market value is applied due to no common physical properties. Within the refinery allocation by net calorific value and mass is used. For the combined crude oil, natural gas and natural gas liquids production allocation by net calorific value is applied.
For details please see the document "GaBi Databases Modelling Principles"All data used in the calculation of the LCI results refer to net calorific value.NoneCut-off rules for each unit process: Coverage of at least 95% of mass and energy of the input and output flows, and 98% of their environmental relevance (according to expert judgment).NoneLCI modelling is fully consistent.NoneFor details please see the document "GaBi Databases Modelling Principles"NoneGaBi databasesIBU-Deklaration CCM; RESITRIX® MB und RESITRIX® CL (EPD-CCM-20120287-IBD1-DE), 201295.0Not applicable2012NoneA1-A3: The environmental profile includes expenses for the life cycle stages cradle-to-gate (module A1-A3). The production of the packaging has been taken into account within the modules A1-A3.No statementCML2001 - Apr. 2013, Freshwater Aquatic Ecotoxicity Pot. (FAETP inf.)CML2001 - Apr. 2013, Human Toxicity Potential (HTP inf.)CML2001 - Apr. 2013, Marine Aquatic Ecotoxicity Pot. (MAETP inf.)CML2001 - Apr. 2013, Terrestric Ecotoxicity Potential (TETP inf.)CML2001 - Apr. 2013, Abiotic Depletion (ADP elements)CML2001 - Apr. 2013, Global Warming Potential (GWP 100 years), excl biogenic carbonCML2001 - Apr. 2013, Global Warming Potential (GWP 100 years)CML2001 - Apr. 2013, Abiotic Depletion (ADP fossil)CML2001 - Apr. 2013, Eutrophication Potential (EP)CML2001 - Apr. 2013, Photochem. Ozone Creation Potential (POCP)CML2001 - Apr. 2013, Acidification Potential (AP)CML2001 - Apr. 2013, Ozone Layer Depletion Potential (ODP, steady state)CML2001 - Apr. 2013, Global Warming Potential (GWP 100), incl bio. C, incl LUC, no norm/weightCML2001 - Apr. 2013, Global Warming Potential (GWP 100), excl bio. C, incl LUC, no norm/weightCML2001 - Apr. 2013, Global Warming Potential (GWP 100), Land Use Change only, no norm/weightThe LCI method applied is in compliance with ISO 14040 and 14044. The documentation includes all relevant information in view of the data quality and scope of the application of the respective LCI result / data set. The dataset represents the state-of-the-art in view of the referenced functional unit.
Sphera Solutions GmbHIBUCCMThis dataset comprises the cradle-to-gate LCI (modules A1-A3) and can be used for LCA.Sphera Solutions GmbH2022-03-01T00:00:00.000ILCD format 1.1Sphera Solutions GmbHNo official approval by producer or operator2022-03-01T00:00:00.00000.00.001Data set finalised; entirely publishedCCMtrueOtherThe EPD owner has agreed to add LCI information corresponding to the EPD to the GaBi databases. The data set can be used free of charge by anybody to perform LCA studies with GaBi software and databases. Any use of the LCI data outside of the GaBi software and databases should not be considered before having received any written permission from Sphera. GaBi (source code, database including extension databases modules and single data sets, documentation) remains property of Sphera Solutions GmbH. Sphera Solutions GmbH delivers GaBi licenses comprising data storage medium and manual as ordered by the customer. The license guarantees the right of use for one installation of GaBi. Further installations using the same license are not permitted. Additional licenses are only valid if the licensee holds at least one main license. Licenses are not transferable and must only be used within the licensee's organisation. Data sets may be copied for internal use. The number of copies is restricted to the number of licenses of the software system GaBi the licensee owns. The right of use is exclusively valid for the licensee. All rights reserved.Roofing membrane CCMOutput1.01.00.000Mixed primary / secondaryCalculatedvaluable